Vinyl Application Instructions

Emblem Overlays

1. Make sure the surface of application is free of dirt and is dry.
2. Peel off the Transfer tape, this will peel the cutout along with it.
3. Align and Apply the Vinyl
4. Apply pressure with your fingers to strengthen the adhesive
5. Use heat gun or hair dryer and apply more pressure (Optional)

Video Tutorial

Taillight Tint Cutouts

1. Make sure the surface of application is free of dirt and is dry.
2. Peel off the Vinyl, Align and apply, press firmly on the vinyl part and then peel off the transparent layer.
3. Use a hairdryer or heat gun to apply some heat to settle the adhesive and press firmly along the edges.
4. Avoid getting the application area wet for the next 24 hours.